316 Stainless Steel Reducing TEE 3-Way Double Ferrule Compression Fitting 30MPa 1/8" 1/4" 3/8" 1/2" 6 8 10 12mm 1PC(0.5 in x 0.375 in)

316 Stainless Steel Reducing TEE 3-Way Double Ferrule Compression Fitting 30MPa 1/8" 1/4" 3/8" 1/2" 6 8 10 12mm 1PCMaterial: 316 Stainless Steel. Straight fittings are machined from bar stock and shaped fittings from forgings.Technics: ForgedType: TEEMaterial SUS 316Working Pressure: 6000 psigThread Specifications: Pressure Rating for Pipe End ThreadFeatures1. Sizes range from 1/16" to 1" and 3 mm to 25 mm.2. Precision machined components ensure deformation of the ferrules and tubing.3. Hardened threads with smooth finishing finish avoid galling and help to extend the fitting service life.4. Female nut threads are silver-plated to reduce the friction against the body threads.5. Radius junction design for elbows provides smooth flow path.6. Every fitting is marked with thread type, size and material.7. Assembled easily without the requirement of any special tools.8. Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.9. Contribute to productivity improvement because of machined surfaces on the inner finishing.ApplicationFor inert gas, reactive, flammable, oxidizing and corrosive gases and gas mixtures, Purity max. 6.0.Tube Fittings are appropriate for Gas Systems, but the implementation of certain standards mentioned below should be adhered to just as in other systems.1. Tubing hardness must be less than that of the ferrules.2. Tubing should be away from finishing imperfections, defects and round in shape.3. Tubing ends must be cut squarely and perpendicular to the center-line of the tubing.4. After the tubing is cut it must be deburred on both the inside and outside with a fully sharpened deburring tool.Installation Instruction1. Firmly insert the tubing until it bottoms in the fitting body.2. Finger tighten the nut.3. Mark

• Material: 316 Stainless Steel. Straight fittings are machined from bar stock and shaped fittings from forgings.
• Technics: Forged
• Material SUS 316
• Working Pressure: 6000 psig
• Thread Specifications: Pressure Rating for Pipe End Thread